360 Systems TCR Multi-Track - Manual (Page 104)

5-20 Error! No text of specified style in document. TCR Series User's Guide
Set Generator
MENU | Machine Setup | Sync and Time Code | Set Gen
The Set Generator function allows you to preset the TCR’s internal time code generator. Use the
following steps to set the time code generator:
1. On the Setup Sync and Time Code Menu, select item 9 (SET GEN). The Set Generator
Prompt appears:
SET GENERATOR
ENTER NEW GENERATOR TIME
USE WHEEL / ARROWS TO MOVE CURSOR
0 1:00:00
'ENTER' = DONE
'CLEAR' = SET TO ZERO
'UNDO' = UNDO CHANGE
'EXIT' = CANCEL
Set Generator Prompt
This menu allows you to preset the internal time code generator, in HH:MM:SS format.
2. Select the digit that you wish to change, and enter the desired number.
Note that if the Generator function is set to STOPPED, the preset time remains on hold until the
generator is started. If the Generator function is set to FREE RUN, the preset time is immediately
loaded and the time code begins to increment, starting at the preset value.