360 Systems TCR Multi-Track - Manual (Page 118)

TCR Series User's Manual System Management 6-5
5. If any locked files are present on the drive, a warning screen appears, indicating the location
of the locked files.
ERASE DRIVE
THESE DIRECTORIES CONTAIN LOCKED FILES
1, 2
PRESS 'ENTER' TO ERASE
PRESS 'EXIT' TO CANCEL
Erase Drive Warning
6. Press ENTER to erase or EXIT to cancel.
Copy Drive
[Drive List, Select Drive] | MENU | Copy Drive
The Copy Drive function allows you to copy all files (or all marked files) from one drive to another.
Use the following steps to copy a drive:
1. To copy a subset of all files, ensure that the desired files are “marked.” To mark a file, access
the File List, highlight each file and press MARK. A check mark appears ( ü ).
2. On the Drive List, press MENU.
3. On the Drive menu, select COPY DRIVE (item 3). The Copy Drive menu appears.
COPY DRIVE
0. COPY NOW
1. > SOURCE DRIVE : 2 (REMOVABLE DRIVE 2)
2. DEST DIR : [ NOT APPLICABLE ]
3. DEST DRIVE : 1 (HARD DRIVE 1)
4. FILES TO COPY : ALL FILES
5. IF FILE EXISTS : RENAME COPY OF FILE
6. ERROR OPTION : LOG AND CONTINUE
7. LOG OPTION : CLEAR LOG FIRST
8. VIEW LOG
'ENTER' OR NUMBER SELECTS MENU ITEM
PRESS 'EXIT' TO EXIT MENU
Copy Drive Menu
4. Select the desired copy options as follows:
•
Choose the Source Drive (item 1, SOURCE DRIVE).
•
Choose the Destination Drive (item 3, DEST DRIVE).
•
Choose the Files to copy (item 4, FILES TO COPY). Choose between ALL FILES
and MARKED FILES.