360 Systems TCR Multi-Track - Manual (Page 75)

TCR Series UserManual Operations 4-25
Cut Edit-In through Edit-Out
[Transport Screen] | MENU | Cut Edit In Thru Out
Cut Edit-In through Edit-Out will remove (delete) a segment of audio from the current file, and
“pull up” (or ripple up) the subsequent audio, earlier in time to the Edit-In point, as shown below.
EDIT-IN THRU EDIT-OUT Fade
Current File
Before Cut
Destination File
Current File
After Cut
0.00 0.00 0.00 Start of File 0.00 0.00 0.00 End of File
0.00 0.00 0.00 Head Point 0.00 0.00 0.00 Tail Point
0.00 0.00 0.00 Start of File
0.00 0.00 0.00 Head Point
0.00 0.00 0.00 End of File
0.00 0.00 0.00 Tail Point
01:00 02:00 03:00 04:00
EDIT-IN THRU EDIT-OUT
Fade
0.00 0.00 0.00 End of File
01:00 02:00 03:00 04:00
01:00 02:00 03:00 04:00
File Timeline
Tail Point
Normally a CUT operation will adjust the Head point of a file to maintain the Head point’s position at
the audio the Head point was set to. If the Head point is between the Edit-In and Edit-Out points,
then the Head point will be moved to the beginning of the audio in the file as illustrated below.
EDIT-IN THRU EDIT-OUT Fade Fade
EDIT-IN THRU EDIT-OUT
Current File
Before Cut
Destination
File
Current File
After Cut
0.00 0.00 0.00 Start of File
0.00 0.00 0.00 Head Point
0.00 0.00 0.00 End of File
0.00 0.00 0.00 Tail Point
0.00 0.00 0.00 Tail Point
0.00 0.00 0.00 Start of File
0.00 0.00 0.00 Head Point
0.00 0.00 0.00 Start of File
0.00 0.00 0.00 Head Point 0.00 0.00 0.00 Tail Point
0.00 0.00 0.00 End of File
End of File
01:00 02:00 03:00 04:00
01:00 02:00 03:00 04:00
01:00 02:00 03:00 04:00
File Timeline