Compaq 9900 - Manual (Page 80)

66 Chapter 4 Configuring and Using the 9900 Subsystem
Goto Filter Backup Query Help
--------------------------------------------------------------------------
I/O Device List
Command ===> ___________________________________________ Scroll ===> PAGE
Select one or more devices, then press Enter. To add, use F11.
Control unit number : 8000 Control unit type . : 2105
-------Device------- --#-- --------Control Unit Numbers + --------
/ Number Type + PR OS 1--- 2--- 3--- 4--- 5--- 6--- 7--- 8--- Base
******************************* Bottom of data ********************************_ __
F1=Help F2=Split F3=Exit F4=Prompt F5=Reset F7=Backward
F8=Forward F9=Swap F10=Actions F11=Add F12=Cancel__
Figure 4.13 I/O Device List Panel (Step 10)
Goto Filter Backup Query Help
.-------------------------------- Add Device ---------------------------------.
| |
| |
| Specify or revise the following values. |
| |
| Device number . . . . . . . . 8000 (0000 - FFFF) |
| Number of devices . . . . . . 128 |
| Device type . . . . . . . . . 3390B________ + |
| |
| Serial number . . . . . . . . __________ |
| Description . . . . . . . . . 3390 Base addresses 8000-807F__ |
| |
| Volume serial number . . . . . ______ (for DASD) |
| |
| Connected to CUs . . 8000 ____ ____ ____ ____ ____ ____ ____ + |
| |
| |
| F1=Help F2=Split F3=Exit F4=Prompt F5=Reset F9=Swap |
| F12=Cancel |
'-----------------------------------------------------------------------------'
Figure 4.14 Add Device Panel (Step 11)