Compaq 9900 User Manual
Compaq Hardware
Table of contents
Document Outline
- Hitachi Freedom Storage™ Lightning 9900™ User and Reference Guide
- © 2003 Hitachi Data Systems Corporation, ALL RIGHTS RESERVED
- Trademarks
- Notice of Export Controls
- Document Revision Level
- Source Documents for this Revision
- Preface
- Contents
- List of Figures
- List of Tables
- Chapter 1 Overview of the Lightning 9900™ Subsystem
- 1.1 Key Features of the Lightning 9900™ Subsystem
- 1.2 Reliability, Availability, and Serviceability
- Chapter 2 Subsystem Architecture and Components
- 2.1 Overview
- 2.2 Components of the Controller Frame
- 2.3 Array Frame
- 2.4 Intermix Configurations
- 2.5 Service Processor (SVP)
- 2.6 Remote Console PC
- Chapter 3 Functional and Operational Characteristics
- 3.1 New 9900 Features and Capabilities
- 3.2 I/O Operations
- 3.3 Cache Management
- 3.4 Control Unit (CU) Images, LVIs, and LUs
- 3.5 System Option Modes
- Table 3.2 Common System Option Modes
- Table 3.3 System Option Modes for Mainframe Connectivity
- Table 3.4 System Option Modes for Open-System Connectivity
- Table 3.5 System Option Modes for ShadowImage - S/390® and ShadowImage
- Table 3.6 System Option Modes for TrueCopy - S/390® Synchronous & Asynchronous
- Table 3.7 System Option Modes for HXRC
- Table 3.8 System Option Modes for Concurrent Copy (CC)
- 3.6 Open Systems Features and Functions
- 3.7 Data Management Functions
- Table 3.9 Data Management Functions for Open-System Users
- Table 3.10 Data Management Functions for S/390® Users
- 3.7.1 Hitachi TrueCopy (TC)
- 3.7.2 Hitachi TrueCopy – S/390® (TC390)
- 3.7.3 Hitachi ShadowImage (SI)
- 3.7.4 Hitachi ShadowImage – S/390® (SI390)
- 3.7.5 Command Control Interface (CCI)
- 3.7.6 Extended Copy Manager (ECM)
- 3.7.7 Hitachi Extended Remote Copy (HXRC)
- 3.7.8 Hitachi NanoCopy™
- 3.7.9 Data Migration
- 3.7.10 Hitachi RapidXchange (HRX)
- 3.7.11 Hitachi Multiplatform Backup/Restore (HMBR)
- 3.7.12 HARBOR® File-Level Backup/Restore
- 3.7.13 HARBOR® File Transfer
- 3.7.14 HiCommand™
- 3.7.15 LUN Manager
- 3.7.16 LU Size Expansion (LUSE)
- 3.7.17 Virtual LVI/LUN
- 3.7.18 FlashAccess
- 3.7.19 Cache Manager
- 3.7.20 Hitachi SANtinel
- 3.7.21 Hitachi SANtinel – S/390®
- 3.7.22 Prioritized Port and WWN Control (PPC)
- 3.7.23 Hitachi Parallel Access Volume (HPAV)
- 3.7.24 Dynamic Link Manager™ (DLM)
- 3.7.25 LDEV Guard
- 3.7.26 Hitachi CruiseControl
- 3.7.27 Hitachi Graph-Track™
- Chapter 4 Configuring and Using the 9900 Subsystem
- 4.1 S/390® Configuration
- 4.2 S/390® Hardware Definition
- 4.2.1 Hardware Definition Using IOCP (MVS, VM, or VSE)
- Figure 4.1 IOCP Definition for FICON™ Channels (direct connect and via FICON™ switch)
- Figure 4.2 IOCP Definition for 1024 LVIs (9900 connected to host CPU(s) via ESCD)
- Figure 4.3 IOCP Definition for 1024 LVIs (9900 directly connected to CPU)
- Table 4.2 Correspondence between Physical Paths and Channel Interface IDs (Cluster 1)
- Table 4.3 Correspondence between Physical Paths and Channel Interface IDs (Cluster 2)
- 4.2.2 Hardware Definition Using HCD (MVS/ESA)
- Table 4.4 HCD Definition for 64 LVIs
- Table 4.5 HCD Definition for 256 LVIs
- Figure 4.4 Master MENU (Step 1)
- Figure 4.5 Basic HCD Panel (Step 2)
- Figure 4.6 Define, Modify, or View Configuration Data (Step 3)
- Figure 4.7 Control Unit List Panel (Step 4)
- Figure 4.9 Selecting the Operating System (Step 6) Goto
- Figure 4.11 Select Processor / Control Unit Panel (Step 8)
- Figure 4.12 Control Unit List (Step 9)
- Figure 4.13 I/O Device List Panel (Step 10)
- Figure 4.14 Add Device Panel (Step 11)
- Figure 4.15 Device / Processor Definition Panel – Selecting the Processor ID (Step 12)
- Figure 4.16 Define Device / Processor Panel (Step 13)
- Figure 4.17 Device / Processor Definition Panel (Step 14)
- Figure 4.18 Define Device to Operating System Configuration (Step 15)
- Figure 4.19 Define Device Parameters / Features Panel (Step 16)
- Figure 4.20 Update Serial Number, Description and VOLSER Panel (Step 18)
- 4.2.3 Defining the 9900 to VM/ESA® Systems
- 4.2.4 Defining the 9900 to TPF
- 4.2.1 Hardware Definition Using IOCP (MVS, VM, or VSE)
- 4.3 S/390® Operations
- 4.4 Open-Systems Configuration
- 4.5 Open Systems Operations
- Chapter 5 Planning for Installation and Operation
- 5.1 User Responsibilities
- 5.2 Electrical Specifications and Requirements for Three-Phase Subsystems
- 5.3 Electrical Specifications and Requirements for Single-Phase Subsystems
- 5.3.1 Internal Cable Diagram
- 5.3.2 Power Plugs
- Figure 5.6 Power Plugs for Single-Phase 9960 Controller (USA)
- Figure 5.7 Power Plugs for Single-Phase 9910 Subsystem (USA)
- Figure 5.8 Power Plugs for a Single-Phase 9960 Controller (Europe)
- Figure 5.9 Power Plugs for a Single-Phase 9910 Subsystem (Europe)
- Figure 5.10 Power Plugs for Single-Phase 9960 Disk Array Unit (USA)
- Figure 5.11 Power Plugs for Single-Phase 9960 Disk Array Unit (Europe)
- 5.3.3 Features
- 5.3.4 Current Rating, Power Plug, Receptacle, and Connector for Single-Phase (60 Hz only)
- 5.3.5 Input Voltage Tolerances
- 5.4 Dimensions and Weight
- 5.5 Floor Loading and Cable Routing Requirements
- 5.5.1 Service Clearance Requirements
- 5.5.2 Minimum Subsystem Disk Configuration
- 5.5.3 Floor Load Rating
- Table 5.10 Floor Load Rating for 9910 Subsystem
- Table 5.11 Floor Load Rating for 9960 Controller with 1 Disk Array
- Figure 5.22 9960 Disk Subsystem with Controller and 4 Disk Arrays
- Table 5.12 Floor Load Rating for 9960 Controller with 4 Disk Arrays
- Figure 5.23 9960 Disk Subsystem with Maximum Configuration
- Table 5.13 Floor Load Rating for 9960 Controller with Maximum Configuration
- 5.5.4 Cable Requirements
- 5.6 Channel Specifications and Requirements
- 5.7 Environmental Specifications and Requirements
- Chapter 6 Troubleshooting
- Appendix A Unit Conversions
- Acronyms and Abbreviations