Compaq 9900 - Manual (Page 76)

62 Chapter 4 Configuring and Using the 9900 Subsystem
OS/390 Release 5 HCD
Command ===> ________________________________________________________________
Hardware Configuration
Select one of the following.
1_ 1. Define, modify, or view configuration data
2. Activate or process configuration data
3. Print or compare configuration data
4. Create or view graphical configuration report
5. Migrate configuration data
6. Maintain I/O definition files
7. Query supported hardware and installed UIMs
8. Getting started with this dialog
9. What's new in this release
For options 1 to 5, specify the name of the IODF to be used.
I/O definition file . . . 'HDS.IODF06.WORK' +
.----------------------------------------------------------.
| (C) Copyright IBM Corp. 1990, 1998. All rights reserved. |
'----------------------------------------------------------'
F1=Help F2=Split F3=Exit F4=Prompt F9=Swap F12=Cancel
Figure 4.5 Basic HCD Panel (Step 2)
OS/390 Release 5 HCD
.------------- Define, Modify, or View Configuration Data --------------. _
| |
| Select type of objects to define, modify, or view data. |
| |
| 4_ 1. Operating system configurations |
| consoles |
| system-defined generics |
| EDTs |
| esoterics |
| user-modified generics |
| 2. Switches |
| ports |
| switch configurations |
| port matrix |
| 3. Processors |
| partitions |
| channel paths |
| 4. Control units |
| 5. I/O devices |
| |
| F1=Help F2=Split F3=Exit F9=Swap F12=Cancel |
'-----------------------------------------------------------------------'
Figure 4.6 Define, Modify, or View Configuration Data (Step 3)