Programming the home theater remote, Code known, Code unknown – Panasonic CT-36VG50 User Manual

Page 33: Infrared remote codes for specific components

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Programming the Home Theater Remote

The remote control can be set to control other manufacturers components, by utilizing the MODE SELECTION

BUTTONS for CABLE, DSS, VCR, RCVR (a Receiver or Amplifier), CD, LD, and AUX (for Cassette Players, Second

VCR or a DVD.)

Code Known

Use the following procedure for setting up the
remote control using the numerical buttons

when the component's remote code is known.

m Determine the brand of the component.

f2l Identify the code(s) associated with the

brand from the infrared code index (see

following pages). Record all possible
codes.

~3l

Confirm that the component is plugged

in and operating properly, then turn it

OFF.

[41 Press and hold thefSi button, then

the

button so that both are

pressedat the same time for iileasil

I6jpiiic>hds. Then let go of the buttons.

Code From

Index Sheet

¿J Press the appropriate Mode button

for the component.

Enter the 3-digit code, by using the
Remote

Control

Keypad

“0"

through ”9” buttons.

Now the remote

entered code. ^

is set for the

m Press the

button to test the remote. If

the correct code is setup for the
component (in step [E)i the component
will turn on.

TNQ2AE012

Code Unknown

Use the following procedure for setting up the
remote control when the component's remote

access code is not known. This procedure

uses the "sequence method".

Confirm that the component is plugged

in and operating properly, then turn it

OFF.

Press

and

hold

the

button,

then the button so that both

are pressed at the same time for H

lilit^5"secdhcll. Then let go of the

buttons.

Press the appropriate Mode button

for the device.

H Press the button to step

over to the next code.

Press the button to test the
remote. If the correct code is

sent, the component will turn on.

@l Once the correct code is found,

press the

button

to store the code.

Repeat from step [H] above until the

proper component code is found. It
may take several attempts before

the correct code Is found.

Note:

Some brands have multiple codes.

Repeat the procedure using another

listed code until the component

responds correctly.

Note:

If an incorrect code is entered, or

when the operation is not
completed within 30 seconds, the
settings will not change.

Infrared Remote Codes for Specific Components

Helpful Hint:

Write down the code numbers for your components in the space provided below. This

will serve as a handy reference whenever you need to reprogram your remote control.

CABLE

Cable TV Converter Box

VCR

Video Cassette Recorder

Compact Disc Player

□

DSS

Digital Satellite System

RCVR

Receiver or Amplifier

Laser Oise Player

□

Othnr Componsnt

Other Component

□

I Other Component

II Other Component

I Other Component |