Panasonic CT-36VG50 - Manual (Page 27)

Timer Features
Sleep Timer
This feature is used for automatic turn OFF in 30,60 or 90
minutes as desired.
NOTE: Display will flash 3,2 and 1 to indicate the last three
remaining minutes prior to turn OFF. To
deactivate, p r e s s o r ^ untirNO” is displayed.
1; Press '
2. Press ^ or '^and*^ or to highlight the Timer
Icon.
'3. Pressli^U button to display the Timer Control menu.
4. Press or to select 30, 60 or 90 (minutes) for
Sleep Timer to be activated.
5. Press twice to exit menus.
NOTE: To deactivate Sleep Timer, repeat steps 1 through
4. In step 4, select “NO” instead of minutes.
Timer Control is not available when Auto Power
On is set.
Special Feature:
Autornatic turn “OFF” after 90 minutes.
The-TV has a special feature that will shut itself
OFF after 90 minutes when turned ON by the
program timer unless a fuhction key is pressed
during the 90 minutes.
This feature is used to insure that the TV will not
remain ON unattended for an extended period of
time.
Programming the OFF timer will also cancel the
automatic OFF feature.
Program Timer
The (Dual Program) Timerfeature is capable of turning the
TV ON to a desired channel and then turning the television
OFF at a predetermined time.
NOTE: The clock and day must be set for this feature to
operate. (Refer to Set Up Menu to Set Time and
Day.)
B
0
lpiulUints: ;
The Program Timer overrides the Sleep Timer.
■prdgrarfTTimer can only access channels in
Program Channel Memory.
“Set Time First” will appear on screen when trying
to set Timer Day Option without the clock being set.
If the Program Timer “ON" functions while the set is
operating the set will automatically tune to the
channel designated in the Program Timer.____
1. Press (^^0.
2. Press ^ or W and or ^ to highlight the Timer
Icon.
3. Press to display the Timer Control menu. '
4. Press A or W to highlight the TIMER 1 orTIMER'2
setting.
Day or days to activate the Timer
ON (time) - hours and minutes
OFF (time) - hours and minutes
CH - the channel the TV is tuned to when the ON Timer
activates.
SET - NO (Timer feature will not activate)
- YES (Timer feature wilt activate)
-
26
-