Panasonic SA-HD52 - Manual (Page 8)

Front Panel Controls and Functions
The indication AM used here
includes both MW and LW.
OOO 0 Q O O
¡5S5E53i^^
0
siM-s t
0
Tuner section
O Tuning buttons (TUNING)
These buttons are used for tuning to the desired broadcast
station.
0
FM stereo indicator (STEREO)
This indicator automatically illuminates when an FM stereo
broadcast is being received.
It will not illuminate if the FM mode selector is set to the
monaural mode.
o Band indicator (FM. LW, MW)
This indicator indicates the band selected by using the band
selector.
0 Digital frequency/input display
This display shows the sound source selected by pressing one
of the input selectors. If the “TUNER" input selector is
pressed, there will be a change to the frequency after the
source is indicated.
0 Quartz-lock indicator (QUARTZ LOCK)
This indicator illuminates when the tuner is precisely tuned to
a broadcast station.
0 Memory scan indicator (M.SCAN)
This illuminates when the memory scanning is activated.
0
Memory indicator (@)
This indicator illuminates when the memory button is pressed,
0
Channel display
This display shows the channel number selected by one of the
preset'tuning buttons.
0
Preset-tuning buttons (1-0)
(24 CHANNEL RANDOM PRESET TUNING)
These buttons are used to preset broadcast frequencies into
the memory of this unit, and are also pressed to recall the
desired preset stations. (Refer to pages 14,15 and 18.)
0 Band selectors (BAND)
These selectors are used to select the band.
0 Memory scan button (MEMORY SCAN)
This button can be used to locate a desired broadcast station;
each broadcast station is selected for about four seconds.
0 Memory button (MEMORY)
This button can be used when presetting broadcast station
frequencies to the memory. (Refer to pages 14 and 15.)
0 FM mode selector (FM MODE)
This unit automatically switches to the stereo mode when an
FM stereo broadcast is received. This selector is used to
select the mode (stereo or monaural) of FM broadcast signals.
(Refer to page 18.)
- 8 -