Panasonic SA-HD52 - Manual (Page 20)

Listening to Tapes
2
TTHI ' I I ' ...................
lU Ul . |. .1.1'. ' . ... ■^t^SSSSSBSS^
i-msx • ü
a
Either tape deck 1 or tape deck 2 can be used for tape playback by
following the same steps.
1
2
3
POWER
Switch ON the power “STANDBY (!) /ON“
switch.
I INPUT SELECTOR |
Press the “TAPE" button.
i EJECT I
Press the eject button, and then insert the
cassette to be used for playback.
I PLAY i
Press the forward- (or reverse-) side play­
back button to select the side (“A” or “B“).
(The playback indicator will illuminate, and playback will
begin.)
PLAY/P-: Plays side "A" {side facing outward).
PLAY/^: Plays side “B".
\J Adjust the volume level and the tone qual­
ity as desired. (Refer to pages 16 and 28.)
M Notes
•Tape deck 1 and tape deck 2 cannot be used for playback at the
same time.
•If the playback button of one of the decks is pressed while the
other deck is in the play mode, playback of the first deck will stop.
•If the volume level is too high during “cue" and “review" operation,
the tweeters in the speaker systems may be damaged.
- 1 * 1 i_LLLJ,
p o S I t I - I i I j -I t I
I To stop tape playback, rewind or fast for­
ward
I STOP [Press the stop button.
(The playback indicator will switch OFF.)
M To fast forward or rewind the tape
I CUE/RE>T| Press one of the fast-forward/cue, rewind/re*
view buttons to advance in the forward or re­
verse direction.
i~^
rli
■ To cue or review the tape
i CUE/REV I
During playback, press and hold the fast-forward/cue or
rewind/review button.
The recorded sound on the tape can be monitored at a
fast speed.
When the button is released, playback will resume.
Full automatic-stop system
When the tape reaches its end, it will stop automatically.
-20-