To program an equalization curve into the memory, Adjust to the desired equalization curve, Press the “memory” button – Panasonic SA-HD52 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To program an equalization curve into the memory
As many as six curves can be programmed into and retained by the
memory of this unit. It is convenient to program those curves that
are frequently used.
1
2
Adjust to the desired equalization curve.
(Adjust by following the steps in "To adjust the desired
tone quality" on page 28.)
MEMORY
Press the “MEMORY” button.
(The equalization-memory indicator will illuminate.)
•To cancel memory programming, press the memory but
ton once again.
P-
1-6
O Press one of the preset-memory buttons
(1-6), whichever Is to be used to make the
programming to the memory.
(The corresponding equalization-preset indicator will illumi
nate, and the programming will be made.)
Note;
If a new curve is programmed for a number for which a curve is
already programmed in the memory, the previously programmed
curve will be erased.
-29-