Panasonic SA-HD52 - Manual (Page 23)

Program play
This function allows you to program up to 20 tracks on the disc in
any order you choose.
1 PROGRAM
Press the program button.
Program indicator
i W-^SKIP»N I
Press the skip button to select the desired
track.
For example; to selects.
Press the button three times.
PROGRAM
Press the program button again to enter the
desired track.
Programrned order
Track
number
Repeat the steps 2 and 3 to add the tracks.
*lf you continue adding track numbers by repeating the
above step, the programmed order counter counts up and
the playing time for each new track is added to the total
playing time. If the total playing time exceeds 99 minutes
or the track number 21 (or higher) has been specified, the
display reads"—:—".
•To specify the same track number successiviy, press the
skip button or M-4)tomovetotheothertrackthan
the desired one. Then press the skip button again to
return to the desired track.
•When ttie 21st program has been performed, “F" (full)
appears on the display, indicating that no more tracks can
be added to the programmed sequence.
•Trade numbers not actually on the disc can not be pro­
grammed.
•To clear the program track, press the clear button. Each
time the clear button is pressed, the last track in the
programmed sequence will be excelled.
PLAY
The bars above and below bie number 3 illuminate,
indicating that track has been programmed.
\J Press the play button.
The programmed sequence is played beginning from the
first track you entered.
•If pressing the numeric button at the remote control trans­
mitter, you can add tracks to the programmed sequence
during disc play.
•The unit stops automatically when all the programmed
tracks have finished playing.
■ To cancel program play, press the program
button.
Pressing the stop button in the stop mode can also cancel program
play.
-23-