Panasonic PV-GS39 - Manual (Page 36)

This function is useful when you want to record
close-up shots of subjects located beyond a
normal zoom range of 1 x to 30* * magnification.
With the Digital Zoom Function, you can select a
magnification from 50x up to 1000x.
• Set to Tape Recording Mode.
1
Set ADVANCED] »[OD.ZOOM]»
[SOx] or [1000X],
OFF Optical zoom only (Up to 3Qx)
SOX Digital zooming to 5Qx
lOOOx Digital zooming to 100Qx
2
Push the [W/T] Lever towards [W] or
towards [T] to zoom in or out.
■ To Cancel the Digital Zoom Function
Set [ # ADVANCED] » [ O D.ZOOM] » [OFF],
Notes:
• The larger the digital zoom magnification, the more
the image quality is degraded.
• When the Card Recording mode is used, the Digital
Zoom Function cannot be used.
■ Wh.te Balance cannot be set .r tl'e Dig.rai Zoom
range.
ALvuf i:i!& Vaiiahie ¡¿rjeoti
Fi.iiKtioi'1
Zoom
When puslorg the ;VV.''T] Lever as far as :t go,
you can zoom from 1 x to 30x in 3.3 seconds at the
maximum in the Recording Mode.
The zoom speed varies according to the amount of
movement of the [W/T] Lever.
The Variable Speed Zoom Function cannot be
used with the Remote Control. (PV-GS59 Only)
If the Camcorder Is shaken while recording, the
camera shake in the image can be corrected.
• If the Camcorder shakes too much, the images
may not be stabilized.
• Set to Tape Recording Mode.
1
Set [ 5 ADVANCED] » [ B EIS] » [ON].
The [HS]] Indication appears.
Press the Recording Start/Stop Button or
[PHOTO SHOT] Button to start recording.
■ To Cancel the Image Stabilizer
Function
Set [ 'g ADVANCED] » [ ¡1 EIS] » [OFF],
Notes:
• When the MagicPix Function is used, the image
stabilizer function does not work, if so, the [ iEisl ]
indication flashes.
• When the Gain Up mode is set to ON, the image
stabilizer function does not work. If so, the [ I eib [ ]
indication flashes.
• Under fluorescent lighting, image brightness may
change or colors may not look natural.
• After-images may appear.
• When a tripod is used, we recommend that you
turn the Image Stabilizer off.
• In the following cases, the Image Stabilizer
Function may not work effectively,
- When the digital zoom is used
- When a conversion lens is used
- When recording is done in an extremely dark
place
- When the Camcorder is shaken greatly
- When you record a moving subject while tracking
it
36