Panasonic PV-GS39 - Manual (Page 28)

: 1% S=TUF;
Setup Sub-Menu
[ □ DISPLAY]
Display Mode (p. 28)
[IDATE/TIME]
Date and Time Indication (pp. 28, 70)
[ d‘ POWER SAVE]
Power Save Mode (p. 29)
[ SI QUICK START]
Quick Start Mode (p. 34)
[ it REMOTE] (PV-GS59 Only)
Remote Control Mode (p. 15)
[ •))) BEEP SOUND]
Beep Sound (p. 28)
[D LCD SET]
LCD Adjustment (p. 22)
[SEVF SET]
Viewfinder Adjustment (p. 22)
[)il INITIAL SET]
Initial Setting Mode (p. 29)
[B® LANGUAGE]
Language Setup Sub-menu (p. 26)
■ O [PICTURE PLAYBACK MENU]
(For PV-GS39/PV-GS59)
S A-n i l>
' f' j:''
ii 'ifiJP ■■■■
___ ¿=__ ___ ^
[ t BASIC]
Basic Setup Sub-Menu
[ 11 DATE/TIME]
Date and Time Indication (pp. 28, 70)
[ On PROTECT]
Setting the Lock (p. 50)
[« ADVANCED]
Advance Setup Sub-Menu
[i^ DPOF SET]
Setting DPOF (p. 50)
[ S’ FORMAT CARD]
Formatting a Card (p. 51)
[a SETUP]
Setup Sub-Menu
[ □ DISPLAY]
Display Mode (p. 28)
[ IE REMOTE] (PV-GS59 Only)
Remote Control Mode (p. 15)
[ 0 LCD SET]
LCD Adjustment (p. 22)
[gftEVF SET]
Viewfinder Adjustment (p. 22)
[ if POWER SAVE]
Power Save Mode (p. 29)
[ IB TV ASPECT]
TV Aspect Mode (p. 51)
[SLANGUAGE]
Language Setup Sub-menu (p. 26)
Menus Related to Taking Pictures
a
DATE/TIME
This switches between date and time indications.
Set [ K BASIC] or [ Si SETUP] » [ H DATE/TIME]
» [D/T], [DATE] or [OFF],
• The Camcorder automatically records the date
and time of picture taking on the tape.
• You can also show or change the Date/Time
Indication by repeatedly pressing the [DATE/
TIME] Button on the Remote Control (PV-GS59
Only).
i DISPLAY
Set [ il SETUP] » [ □ DISPLAY] » [ON] or
[OFF],
Set to [ON] and the display mode can be switched
to all functions. Set to [OFF] and it can be
switched to minimum display.
■ AUDIO REC
• Set to Tape Recording Mode.
You can select the sound quality of the recorded
sound.
Set [^ADVANCED] » [J1 AUDIO REC] »
[12bit]or[16bit],
[12bit]:
Records audio in “12 bit 32 kHz
4 tracks". (The original audio signals can
be kept after the other audio signals are
dubbed.)
[16bit]: Records audio in “16 bit 48 kHz
2 tracks". Audio can be recorded in
higher quality. (If audio signals are
dubbed, then the original audio signals
will be erased.)
■ BEEP SOUND
• Set to Tape/Card Recording Mode.
When [»)) BEEP SOUND] on the [ SETUP] is
set to [ON], confirmation/alarm beeps are issued
as follows.
1 Beep
• When you start recording
• When you turn on the power
• When the unit goes from Quick Start standby
mode to recording pause
2 Beeps
• When you pause recording
• When you turn off the power
• When the unit goes into Quick Start standby
mode
2 Beeps 4 times
• When a cassette with its erasure prevention tab
set to [SAVE] is inserted, condensation occurs
(p. 73). and at other times. Check the sentence
displayed on the screen (p. 71).
28