Panasonic PV-GS39 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

i POV'.’iTi?
1&--
-T
[5 MINUTES] or [OFF],
[OFF]:
When about 5 minutes passed without any
operation, the standby mode automatically will be
set. in the standby mode, [ ii ] blinks and it takes
time more than usual to start recording after you
press the Recording Start/Stop Button.
[5 MINUTES]:
When about 5 minutes passed without any
operation, the Camcorder automatically turns off
to protect the tape or to prevent the battery from
running down. When you use the Camcorder, turn
it on again.
• In the following oases, the power may not
turn off even when set [
ef
POWER SAVE] »
[5 MINUTES].
- When connecting to the AC Jack
(When using the AC Adaptor)
- When connecting the USB Cable or the DV
Cable to a PC or other equipment
- When the PC fylode iFor PV-GS39.'PV-G359:
■.fifleriws iRelatetì'.io Playbacki'.v.v.v.v.'.'..': : : :
I AUDIO OUT
This switches the sound to be played back.
Set [ ii SETUP] » 1 Jt AUDIO OUT] »
[STEREO], [L] or[R].
[STEREO]:
Stereo sound (main sound and sub
sound)
[L]:
Left channel sound (main sound)
[R]:
Right channel sound (sub sound)
iOther M
e
n
u
s
-
.
(
-
.
V
.
■
*
•
■ INITIAL SET
• Set to Tape/Card Recording Mode.
Set [iiSETUP] >> [il INITIAL SET] » [YES] or
[NO].
Set to [YES] to change menu settings back to their
factory default condition.
• The inifializing takes a little while.
• Language setting cannot be back to the initial
shipping condition.
■ DEMO MODE
• Set to Tape Recording Mode.
If you set [ ii SETUP] » [ ■ DEMO MODE]
» [ON] without inserting a cassette or a
card, the Camcorder is automatically set to
the demonstration mode for introducing its
functions. If any button is pressed or operated,
the demonstration mode is canceled. If no
operations take place for approx. 10 minutes,
the demonstration mode automatically starts.
To terminate the demonstration mode, insert a
cassette or a card, or set to [ H DEMO MODE] »
[OFF]. For normal use, set this function to [OFF].
You can switch the tape recording speed.
• Set
to
Tape Recording/Playback Mode.
1
Set
[ i
BASIC] or
[ S
ADVANCED]
» [
E
REC SPEED] » [LP],
If the LP mode is
selected, the
recording
time will be 1
.5 times
the
SP
mode, but some
functions
will be disabled.
• We recommend using the SP mode for important
recordings.
• In order to fully exhibit the performances of the LP
mode, we recommend using Panasonic cassettes
marked LP mode.
• Audio dubbing is not possible with LP Mode. (p. 53)
• In the LP mode, the picture quality will not be
degraded in comparison with the SP mode, but
mosaic noise may appear on the playback image or
some functions may be disabled.
- Playback on other digital video equipment or on
digital video equipment without the LP mode.
- Playback of the image on other digital video
equipment recorded in the LP mode.
- Slow Motion/Still Advance playback.
o
S
c
S5.
to
29