Panasonic NV-S99A - Manual (Page 25)

^ ■ Remote Controller
Playback, Fast-forward, Rewind, Stop and
Pause operations can be operated with this
Remote controller.
[REW] Button
[PLAY] Button
[FF] Button
[PAUSE] Button [STOP] Button
L...- ^
This Movie Camera is equipped with a built-in
Time Base Corrector (TBC). This TBC function
produces stable playback pictures by
compensating for slight picture distortions caused
by instability of the tape movement. This function
makes the Movie Camera highly suited as source
machine for editing.
•As the TBC function automatically works in the
playback mode, it requires no special operation.
• it is not possible to turn the TBC function off.
To listen to the recorded sound during playback
connect stereo headphones (optional) to the
[PHONES] Socket. {When playing back a cassette
tape on which audio dubbing has been performed,
refer to p. 55.)
tn
c
o
S
s.
o
u
»
CO
m
Remarks, etc.
REW/®
The tape stops
automatically when it
reaches the beginning.
TBC function will be automatically activated
during playback. (See note above.)
• If you reach the end of the tape during playback, the
tape rewinds automatically.
■ To Stop the Playback
Press the [SET/STOP] Button.
For Still Playback:
ITEM-I
PAUSE
I
To Return to
Normal Playback:
ITEM”
PAUSE
Still Playback Mode
• If you reach the end of the tape during Fast-
Forwarding, the tape rewinds automatically.
• if you reach the beginning of the tape during
Rewinding, the tape stops automatically.
•The sound is played back only during normal
playback.
• In the Cue, Review and Still Playback Modes,
horizontal noise bars appear in the picture, or the
picture may become black and white or distorted.
However, this is nomnal and not a malfunction.
•If the Movie Camera is left in the Still Playback Mode
for about 6 minutes, it will switch over to the Stop
Mode to protect the tape and the video heads.
25