Setup utility, Running the setup utility, 9 closing the setup utility – Panasonic CF-E1M User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setup Utility
An explanation is given below on a utility program (i.e., Setup Utility) for displaying the BIOS
information and for setting the password.
Running the Setup Utility
1
Turn on your computer by pressing the Power Switch or restart
using the [Start]-[Shut Down]
2
When [Press
X
note
>
• This Setup Utility will not be run if CS) is not pressed soon after the computer is
started. In this case, you need to restart your computer again.
If “Enter your password” is displayed, input your password. (C^ page 50)
Item
Menu
Main
PhoenixBIOS Setup Utility
Security
BIOS Version:
Vx.xxLxxxxx
System Time:
[xx:xx:xx]
System Date:
[xx/xx/xxxx]
System Memory:
xxxxx KB
Primary Master:
xxxxMB
Secondary Master:
DVD Drive
Item Specific Help
i^Help
f A Select item
Change Values
QaaExit
Select Menu
Select ►Sub-Menu
9 Closing the Setup Utility
1
Using
[
^-l and Q , select [Exit] menu and then press [Enter!
Windows will start.
When the password has been set, it will be necessary to input the password before Win
dows can start up.
.(
note
)------------------------------------------------------------------------------------------
Key Operations (
FI
] :To display the “General help” file.
(
Enter
) :To display sub-menu.
:To display [Exit] menu.
0® :To move among the menus.
0© :To move among the items.
:To move among the values.
49