Dv capture, Movie capture, Confirm that "dv" is displayed – Panasonic CF-E1M User Manual
Page 38: Click n, Click [movie capture] to begin capture, Click again to end the capture, Or, click
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DV Capture
X
note
>
Before Capturing Moving Image
• Before performing moving image capture (to prevent frame dropping and to
perform the capturing correctly)
• Close all other applications and resident applications such as virus checkers.
• Do not use any coiniminication function.
• Click the desktop (wallpaper) with the right button, and remove the check mark
next to [View As Web Page] in [Active Desktop],
• Click [Start] - [Programs] - [Accessories] - [System Tools] - [Disk Defragmenter],
and execute “Optimize'’ for the C drive.
# About the possible display sizes
• 360 by 240 pixels display size
• Maximized display size
It is possible to maximize an image display by pressing the "maximize" button (the
image quality will be degraded).
• When DV Capture is running, it is not possible to enter the hibernation mode.
Movie Capture
It is possible to save scenes as a moving image file from images recorded on tape or inputs from
a digital video camcorder.
1
2
Running DV Capture
(c? page 37)
Playing the tape and then perform moving images capture as
follows
® Confirm that "DV" is displayed
When "DV" is not displayed, click [SELECT].
Click
n.
38
To display incomming DV data
Click [MOVIE CAPTURE] to begin
capture
• During moving image capture, do not perform
other operations like moving the mouse.
• During capture, the capture time is displayed.
Click again to end the capture
The capturing ends, but the playback continues.
or, click
•
The maximum capture time is about three minutes. One minute is equal to a file size of
about 230 Mbytes.
•
Captured images cannot be saved on a compressed drive. In addition, voice over and
wide sound capture are not possible.
•
It may not be possible to perform capture properly when capturing the starting or end
ing part of a tape or there are parts on a tape that include unrecorded parts.
•
When the contents of a tape arc mixed between the (SP/LP) camera mode, it may not be
possible to correctly capture the boundaries sharing these two modes. Perform capture
in the range of the same camera mode.
•
If the remaining capacity of the hard di.sk is below about 300 Mbytes, capturing stops
automatically.
•
Special functions of a digital video camcorder (e.g., effects and multi-displays) may not
work properly.
(To next page)