Panasonic CF-E1M - Manual (Page 21)

X note >
When “Turn off monitor” is set,
Do not set the screensaver. When both this function and the screensaver arc set, the
power of the display may not respond properly or the computer may be unable to
properly resume from the hibernation mode.
When the communications function is utilized.
When communications is being performed using a modem, the power saving func­
tion activates and the computer may enter the hibernation mode during data com­
munications or the communications may not proceed smoothly. When using the
communications function, wc recommend setting [Never] for [System standby] or
setting a sufficiently long period of time in the dialog box.
If the Power Saving Function Activates
If the computer is left alone for the time set on the previous page, the power saving function
will activate.
# If the computer screen turns off
Either press a key or move the mou.se to resume.
At this time, use a key that will have no influence on software in the computer (c.g., @).
since the input of the keyboard or mouse is received by the computer.
When the screen does not return to the original screen even with
the above operation
The system standby is activated and the computer has entered the hibernation mode.
Power on the computer by holding the power switch down for
approximately one second.
Refer to the page 19 for the details on resuming operation from the hibernation mode.
NOTEf
When the power of the hard disk has been cut
The power of the hard disk is automatically turned back on when an attempt is made to
access the hard disk.
21