Panasonic CF-E1M - Manual (Page 42)

DV Capture
Detailed Settings for Stili Image Capturing
1
2
3
Running DV Capture
{o= page 37)
Select [Settings] and then [Still Settings]
Make the still image settings and click [OK]
Select the size.
Select the color option of the image.
Color :About 16 million colors (24-bit)
Monochrome :256-step gray scale
Sepia :256-stcp sepia colors
Select the format to save the image in (i.e., either JPEG or BMP).
X note )-------------------------------------------------------------------------------------------
File sizes differ according to the size of the image and color settings.
It is also possible to change the settings by using the pop-up menu displayed when
clicking the right button over the display of Step 2.
Changing the destination folder and file name
It is possible to change the destination folder and file name by running [DV Capture] and
selecting [Folder Settings] from the [File] menu.
It is possible to change the destination folder.
(However, it is not possible to make settings for drives other than the C drive.)
The factory set destination folder is C:\Mylmage.
rFl»
CuntntSebng |ctivmige
i"~ Eftwse.. 'I
10(Д1ПО
OiJter Customtee
ijif^tlTTTwr f___j[ ^
1
J
OK
Auto create
This is the factory set.
[CP] is added at the top of the file name, fol­
lowed by the automatic addition of the date of
creation and time (c^ page 39, 41).
-User Customize
It is possible to freely designate
the name (ID Code) attached to
the head of a file name with eight
characters. However, the follow­
ing characters cannot be used.
\ / : * ? ” < > I
(The default name is set to
USER.)
In addition, it is possible to set the
range of the three numerals added
at the end of the name (ID Num­
ber 000 to 999). (However, iden­
tical files will be ovcrw'rittcn.)
Example: USER000.JPG
ID Code
ID Number
42