Starting up / shutting down, Starting upyour computer quickly, Sleep switch – Panasonic CF-E1M User Manual
Page 18: Enter the hibernation mode by selecting [stand by, Select [start] - [shut down] select [stand by, 0 click [stand by, D click [ok, Starting up your computer quickly, Enter the hibernation mode with the sleep switch, Press the sleep switch
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
starting Up / Shutting Down
Starting UpYour Computer Quickly
Sleep Switch
If the computer is powered off while system standby (hereafter, hibernation) function is being
used, the state of the computer is saved to the hard disk and then the power goes off. When the
power is turned back on again, the original state before the computer went off is called up,
allowing you to immediately continue unfinished work.
The following methods are available to enter the hibernation mode.
•
Enter the hibernation mode with the sleep switch
•
Enter the hibernation mode by selecting [Stand by]
Save your data before using the hibernation function for safety.
• For the purpose of refreshing your computer, periodically (i.c., about one time a week)
perform the "Windows Shutdown" operation and power your computer off without us
ing the hibernation function.
“v________________________________ ,__________________________________
Enter the Hibernation Mode With the Sleep Switch
1
Press the sleep switch
Confirm that there is a beep sound and take your hand away. If the volume level is set to
low, the sound will be inaudible.
r
Do not press down on the sleep switch for four seconds or more, if the switch is held
dow'n for this period of time, a continuous beeping sound continues, and the computer
is forced to shut down without entering the hibernation mode._____________________________________ ^
When the screen goes off after a short period of time, the current state of the computer is
saved to the hard disk. While data is being saved, the screen becomes blue and a red
indicator is displayed showing the progress of the process. After that, the power of the
computer goes off. (The power indicator goes oft'.)
Enter the Hibernation Mode By Selecting [Stand by]
7
2
Select [Start] - [Shut Down]
Select [Stand by]
Shut DuwnWindoMt
%
What do you want the computer to do?
----------
C^Rortart intis-DOS
mode
QK
■0
Click [Stand by]
(D Click [OK]
After the screen goes off after a short period of time, the current state of the computer is
saved to the hard disk. While data is being saved, the screen becomes blue and a red
indicator is displayed showing the progress of the process. After that, the power of the
computer goes oft'. (The power indicator goes off.)
18