Using one-touch/abbr. number dialling, Using manual number dialling, Manual number dialling – Panasonic UF-333 User Manual

Page 99: Sub-addressing

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Sub-addressing

To send a Document with Sub-address

Using One-Touch/ABBR. Number Dialling

The operation is the same as for normal Dialling

1 ^

Set documGnt(s) face down.

ENTER STATION

Your machine starts to dial the number of the station and

sends the document(s) with Sub-addressing information.

Using Manual Number Dialling

Use I FLASH I to separate the Telephone number and the Sub-address.

_______ Set document(s) face down.

<01> {Station name)

5551234S2762

* DIALLING *

5551234

ENTER STATION

Enter the telephone number, press I FLASH I then enter
the Sub-address (up to 20 digits).
(up to 36 digits including telephone number, pauses,
spaces, FLASH and Sub-address)

Ex: Telephone number = 5551234, Sub-address =2762

Enter as:

(5)(D(D®(D@@

CTLASff] (2)(7)C6)®

PRESS START TO DIAL

5551234s2762|

Your machine starts to dial the number of the station and

sends the document(s) with Sub-addressing information.

* DIALLING *

5551234

Note:

.1 FLASH I separates the Sub-address from the Telephone number and is indicated by an "s” in the

display.

2. Manual Off-Hook or On-Hook Dialling cannot be used with the Sub-addressing Transmission.

3. The Sub-address is not transmitted during Manual Redial Mode.