Panasonic UF-333 - Manual (Page 36)

► Customizing Your Machine
No. Parameter
Setting
Number
Setting Comments
18 OP CALL TIMER 1 20 sec. Selectingthe length of time that your machine signals (rings) for
an iricoming voice call in Fax/Tel Auto Switching mode (see page
60).
2 30 sec.
3 40 sec.
4 50 sec.
19 OGM LENGTH (TAM l/F) 1 1 sec. Setting for the OGM length of your TAM from 1 to 60 seconds.
The machine will not start to detect SILENCE until the time
setting has lapsed.
... ...
60 60 sec.
20 SILENT DET. (TAM l/F) 1 Invalid Selecting the Silent Detection Mode.
2 Valid
22 SUBSTITUTE RCV 1 Invalid Selecting whether or not the machine receives to memory when
recording paper runs out, ink runs out or recording paper
jammed. 2 Valid
23 RECORDING PAPER
SIZE
1 A4 Setting the recording paper size installed in your machine.
2 Letter
3 Legal
24 PRINT REDUCTION
1 Fixed
Selecting print reduction mode.
Fixed: Reduce received document according to setting of
Parameter No. 25.
Auto: Reduce received document according to the length of
received documents.
2 Auto
25 REDUCTION RATIO 70 70% Selecting fixed print reduction ratio from 70% to 100%. This
parameterfunctions only when fixed print reduction is selected
in fax parameter no. 24.
... ...
100 100%
26 POLLING PASSWORD
(....)
Setting a 4-digit password for secured polling.
28 STAMP AT MEM. XMT 1 Invalid Selecting whether or not the machine stamps the original
documents when storing the documents into memory.
2 Valid
30 DRD SERVICE 1 Invalid
Selecting whether or not the machine is available "DRD
Service”. If this parameter is set to "Valid”, your machine detects
2 Valid
the specified ring pattern only to receive a document
automatically
33 XMT REDUCTION 1 Invalid Selecting whether or not the machine reduces №e document Into
2 Valid
35 DAYLIGHTTIME 1 Invalid
Selecting whether or not the clock adjusts for Daylight Saving
Tlmeautomatically. The built-in clock will advance 1 hour at 2:00
2 Valid
am on the last Sunday in March and fallback 1 hour at 3:00 am
on the last Sunday in October.
Continued on the next page.