To redial the last dialed number through adf, Sending documents – Panasonic UF-333 User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Sending Documents
^
Redialling
Automatic Redialling
If the line is busy or there is no answer, your machine will redial the
number up to 3 times at 3 minutes interval. During that time, a
message will appear as shown to the right.
A file number is shown at the upper right corner of the display if it
is a memory transmission file.
Manual Redialling
WAIT TO DIAL NO.001
(Telephone number)
You can also redial the last dialed number manually by pressing the REDIAL
To redial the last dialed number through memory
key.
1
ENTER STATION(S)
THEN PRESS START 00%
Set document(s) face down.
Make sure that the MEMORY lamp is on.
TEL. NO.
5551234
3
* STORE *
N0.002
PAGES=01 01%
The document is stored into memory with a file number.
Then dials the last dialed number.
To redial the last dialed number through ADF
* DIALLING * NO.002
5551234
1
Set document(s) face down.
Make sure that the MEMORY lamp is off.
2
m
TEL. NO.
5551234
Your machine starts to dial the last dialed number.
* DIALLING *
5551234
Note: 1. While the unit is displaying "WAIT TO DIAL”, you can press REDIAL to start redialling immediately.
2. While the unit is displaying "DIALLING” and a message is heard through the monitor that the circuits are
busy.... you can press REDIAL to start ledialling immediately.
57