Basic transmission settings, Contrast, Resolution – Panasonic UF-333 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Transmission Settings ^
You can temporarily change the transmission settings either before or after you place the document on the ADR
These settings are as follows;
• Contrast
• Resolution
• Halftone
• Verification Stamp
• Communication Journal
After your document has been sent, your machine will automatically return to the preset settings.
Contrast
Your machine is preset to
Normal
contrast. If you wish to send a document with lighter contrast, change the
setting to
Lighter.
If you wish to send a document with darker contrast, change the setting to
Darker.
PressI CONtR)^ to:
CONTRAST
□
DARKER
a
LIGhTTER
CONTRAST = Normal
O
CONTRAST
1
DARKER
UQHTER
CONTRAST = Lighter
1=3
BARKER (V)
CONTRAST
DARKER O
LIGHTER
CONTRAST = Darker
HI
iJ Note: To change the preset Contrast position, change the setting of Fax Parameter No. 01, see page 33.
Resolution
Your machine is preset to
Standard
resolution, which is suitable for most documents.
Use
Fine
or
Super Fine
for detailed documents.
Press RESOLUTION to:
RESOLUTION
c=i
S-Rne
FINE
RESOLUTION = Standard
RESOLUTION
crt
S-Fine
o
FINE
RESOLUTION = Fine
RESOLUTION
€™ o
FINE
RESOLUTION = Super Fine
Q] Note: To
change the preset Resolution position, change the setting of Fax Paramefer No. 02, see page 33.
39