Panasonic UF-333 - Manual (Page 34)

► Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed. If you do want to make a change, read the table
carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily changed by
simple key operation just before a transmission is made. When the transmission ends, however, these
parameters return to their preset values (Home position). Other parameters can only be changed by the
procedure described below.
Setting the Fax Parameters
1
FUNCTION SET MODE (1-4)
ENTER NO. OR V A
2
SET FAX PARAMETER(01-99)
NO.=|
3
4
Enter Fax Parameter number from the Parameter Table
(see pages 33 to 35).
Ex: ®© for CONTRAST
SET
FAX PARAMETER(01-99)
NO.=01
01 CONTRAST
1;NORMAL
5 Enter the new setting value.
Ex: @ for LIGHTER
01 CONTRAST
2:LIGHTER
6
SET
02 RESOLUTION
1:STANDARD
To set another parameter, press I CLEAR I to return to step
3, or, to return to standby, press I STOP I.
m
Note: 1. To scroll the Fax Parameters in Step 2 or 4, press 0 or 0 -
2. To print out a Fax Parameter List, see page 107.