Sending documents – Panasonic UF-333 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
► Sending Documents
On-Hook Dialling
For On-Hook Dialling, follow these steps
1
Set document{s) face down.
ENTER STATION
00
%
2
MONITOR
* MONITOR *
You will hear dial tone through the monitor speaker.
3
Dial the telephone number from the keypad.
Ex: (Dd)®®®®®
* DIALLING *
55512341
ON LINE * XMT *
5551234
m
Note:
1
. If you need a special access number to get an outside line, dial it first then press I PAUSE I to enter a
pause (represented by a before dialling the fail number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press
I
TONE I (represented by a T).
The dialling mode will be changed from Pulse to Tone after dialling the digit T.
Ex: 9 PAUSE TONE 5551234
3. To stop the transmission, press I STOP I,
The display shows:
COMMUNICATION STOP ?
1:YES 2:NO
Press
(T) to
stop the transmission. The Communication Journal will not print out regardless of the
printout mode setting of the Communication Journal.