Panasonic UF-333 - Manual (Page 37)

Customizing Your Machine
No. Parameter
Setting
Number
Setting Comments
36 RING PATTERN
DETECT (DRD)
1 Invalid All ring patterns.
2 Valid Select a ring pattern for automatic answering.
1; A Standard ring pattern.
2: B Short ring pattern.
3: C Double ring pattern.
4: D Triple ring pattern.
37 RCV TO MEMORY
(--)
Entera 4-digit password used to print out the received document
in memory by F8-5 (RCV TO MEMORY). When F8-5 is set to On.
this parameter will not be shown on the LCD display, (see page
83)
42 CONR POLLED RLE
SAVE
1 Invalid Selecting whether or not the machine saves the confidentiai
polied file even after the file is polled once.
2 Valid
46 SELECT RCV 1 Invalid Selecting whether or not the machine performs selective
reception, (see page 87)
2 Valid
47 REMOTE RCV 1 Invalid Selecting whether or not the machine accepts remote reception
command (see page 59).
2 Valid
48 TELEPHONE LINE 1 PSTN Selecting the type of line connected.
2 PBX
49 PSTN ACCESS CODE 0— Setting PSTN Access Code. (max. 4 digits)
50 FLASH KEY 1 Earth Selecting to use FLASH on control panel either as Earth key or
Flash key.
2 Flash
52 DIAGNOSTIC
PASSWORD
(--)
Setting the password for Remote Diagnostic Mode. Please ask
your Panasonic Authorized Dealer for details.
53 SUB-ADDRESS
PASSWORD
(--)
Setting a 20-digit password for secured sub-address
communication.
99 MEMORY SIZE - - Display the amount of base memory installed.
HI
Note: 1. The contents of Fax Parameter may differ depending on the each country’s regulation or specification.
2. The standard settings are printed on the Fax Parameter List. To print out Fax Parameter List, see
page 107.
35