Basic transmission settings, Halftone, Verification stamp – Panasonic UF-333 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
► Basic Transmission Settings
Halftone
The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is
preset to HALFTONE = Off.
Press HALFTONE to:
HALFTONE
HALFTONE
's,
I
if
o
+ ''O
HALFTONE = Off HALFTONE = On
m
ij Note: When you select HALFTONE, your machine will automatically select Fine Resolution.
Verification Stamp
The Verification Stamp heips you to confirm successfui transmissions by stamping the bottom of each
successfuiiy transmitted page with a smaii
(gi
mark.
Press I STAMP
I
to:
STAMP
“O ■
STAMP = Off
STAMP
O “
STAMP = On
ffl
Note:
1
. When you store a document in memory, the Verification Stamp will stamp on the document If it is
successfully stored in memory. In this case the Venfication Stamp is not a confiiwation that the
document was successfully transmitted. If you wish to disabie the use of the Verification Stamp when
storing document in memory, change the setting of Fax Parameter No. 28, see page 34.
2. To change the preset Venfication Stamp position, change the setting of Fax Parameter No. 04, see
page 33.