Panasonic UF-333 - Manual (Page 86)

► Receive To Memory
Printing Out Documents
After receiving a document with Receive To Memory feature, the following message will appear on the display.
MESSAGE IN MEMORY
< RCV TO MEMORY >
To print the document, follow these steps below.
1
FUNCTION SELECT MODE (1-5}
ENTER NO. OR V A
2
SET RCV TO MEMORY=ON
1:OFF 2;ON 3:PRINT
3
RCV TO MEMORY=PRINT
1:OFF 2:ON 3:PRINT
SET
INPUT PASSWORD
III!
]
5
6
Enter the password to print the documents,
(see Note 1)
Ex:
®dXD@
SET
Machine will start to print the documents.
INPUT PASSWORD
1234
* PRINTING *
MEMORY RCV'D DOC
^ Note: 1. If the password has not been set, your machine will not prompt you to enter the password.
The documents will be printed immediately after pressing I SET I in step 4.
2. Once you set RCV TO MEMORY feature to On, the password cannot be changed (Fax Parameter No.
37 will not be shown on the LCD display). If you wish to change the password, set RCV TO MEMORY
feature to Off first. Then change the password (see page 83).