Paper specifications – Panasonic UF-333 User Manual
Page 130
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

► Paper Specifications
In general, most plain bond papers will produce excellent results. Most photocopy papers will also work very
well. There are many "name" and "generic” brands of paper available. Before purchasing large quantities, we
recommend that you test various paper samples until you obtain the results you are looking for.
The following table summarizes the major specifications to consider when seiecting white or coiored paper.
16 to 24 lb (60 to 90 g/m2)
Cut with sharp blades, no visible frayed edges
±0.8 mm of nominal, corners 90° ±0.2°
Long grain
4% to 6% by weight
84% minimum
Polylaminated moisture-proof ream wrap
Letter -.216 mm x 279 mm
A4 : 210 mm X 297 mm
Legal : 216 mm x 356 mm
Cut sheet
304.8 mm minimum (Dimension)
Basic Weight
Cut Edge Conditions
Finished Dimensions
Grain
Moisture Content
Opacity
Packing
Sizes
Type
Wax Pick
m
Note:
1
. It is possible that the paper meets the specifications listed above and still not pnnt well because of the variations
in the manufacturing. Therefore, we recommend that you test thoroughly before purchasing in large quantity.
2. Poor quality paper may reduce print quality and cause paper jams and other problems. If you encounter
problems, switch to a higher grade of paper.