Panasonic SC-CH350 - Manual (Page 24)

Listening to Compact Discs
Sequential play
Sequential play refers to play beginning with the first track and
continuing in order to the last track.
1
13
(Also available from the remote control)
1 Press the CD input select button.
2 Press OPEN/CLOSE to open the disc tray,
insert the disc with label facing up.
Do not put your finger through the hole in the middle of the disc
tray. It could get caught when the tray closes.
Label must face up.
3 Press OPEN/CLOSE to close the disc tray.
When the disc tray is closed, the disc rotates, and the total
number of tracks and total playing time both appear on the
display panel.
Total playing time
Total number of tracks
r 77
1- ±1
III r n-n r
1 'I D _/■/_/ _/
When there are 13 or more tracks on the disc,
pear. will ap-
Press the CD play button.
Disc play begins from the first track on the disc. The pickup (a
laser device that reads the information on the disc surface)
moves across the disc as the disc is played.
•The number of the track being played will flash while the
track is played and go out at the end of that track.
The track number currently playing flashes.
• Play stops automatically when the last track on the disc
finishes playing. (The display returns to the total number of
tracks and total playing time indications.)
Notes;
•The total playing time which appears on the display includes the
time between tracks, hence there may sometimes be a difference
of several seconds between this time and the playing time indi­
cated in the liner notes that comes with the disc.
• If you press the play button on the remote control instead of
OPEN/CLOSE after inserting a disc, the tray will close and play
will start directly from the track 1, but the total tracks and total
playing time will not be displayed.