Panasonic SC-CH350 - Manual (Page 22)

Listening to Radio Broadcasts
(continued)
Memory presetting
When you preset broadcast frequencies to the memory, you can
then easily select any of those broadcast frequencies by pressing
one of the numeric buttons on the remote control or by using the jog
dial.
You can input up to 30 radio stations (10 FM, 10 LW and 10 MW)
into the tuner's preset memory.
(When you memorize a new frequency on a preset channel, it
cancels the frequency previously memorized on that preset
channel.)
1 Press the band-select button to select FM, LW
or MW.
2 Press TUNING to select the MANUAL tuning
mode.
• Every time you press this button, the MANUAL and PRESET
modes alternately appear.
A/f O hi I I O I
/ M 7 / t _ M / / _
0Tune In your favorite station using the jog
dial.
Turn the jog dial until the correct frequency and the quartz
lock Indicator appear on the display.
( 2 ) Press SET to activate the program indi­
cator.
The program indicator will flash for about 10 seconds.
r h^l n o 1 t~n QUARTZ
1 l.t
\ 1 /
u u. ( U MHZ
— PROGRAM —
________ / ll \_________
STCHEO
0Turn the jog dial to select the desired pre­
set channel number while the program indi­
cator is flashing.
(^^: The channel number will increase from 1 to 10.
The channel number will decrease from 10 to 1.
h>!
t I
on in “iss;"
U U. t U MHZ
PnOGfUM
^ i " TS
Channel number
@ Press SET.
The program indicator will disappear.
Repeat steps 3 through 4 to memorize a sta­
tion in each of the remaining preset channels.
Flashing