Panasonic SC-CH350 - Manual (Page 33)

■ To stop playback
{Also available from the remote control)
Press the stop button.
1
□
■ Full auto-stop
When the tape reaches the end, the tape transport will automati­
cally stop. However, if you have set the reverse mode select button
to in the playback mode, the auto-stop function will not
operate.
■ About the Dolby Noise Reduction system
Using Dolby NR reduces tape hiss in the high-frequency range. It
boosts the level of the high-frequency program content during
recording, and lowers it by the same amount during playback,
simultaneously reducing high-frequency noise incurred during the
recording process.
This system has the Dolby B-type of noise-reduction system. With
Dolby B, noise is reduced to about one-third. If you are playing a
tape that was recorded with Dolby NR, use the Dolby NR mode
during playback.
Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
“DOLBY" and the double-0 symbol □□ are trademarks of
Dolby Laboratories Licensing Corporation.
■ About one touch play back
From the power standby condition, you can listen to tapes by
pressing one of the play buttons (except the condition during
TIMER/TIMER REC indicator lights).
When tapes have been loaded in both decks, deck 2 has priority,
/ < I 1 > \
33