To play back prerecorded cassettes, 1 press the tape input select button, 3 press reverse mode – Panasonic SC-CH350 User Manual
Page 32: 5 press one of the play buttons to start playback, Listening to tapes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
You can use either deck 1 or deck 2 for tape playback by following
the same steps.
Listening to Tapes
To play back prerecorded cassettes
1
Press the TAPE input select button.
2
Press EJECT, and then Insert the cassette you
wish to play.
• Insert the cassette with the exposed tape facing down.
•You can use normal, chrome and metal tapes for playback.
This deck automatically identifies the kind of tape loaded,
and sets the equalization accordingly.
(Auto tape selector function)
•To reset the tape counter to 000, first press the DECK 1/2 to
select the deck you are going to use and press the counter
reset button.
When the system reverses to play the reverse side of the
tape, the counter will count backward (000, 999, 998...).
3
Press REVERSE MODE,
Each time you press, the display will show one of three re
verse mode indicators.
^
: The player plays one side only, and then the tape
automatically stops.
: The player plays both sides, and then the tape
automatically stops.
If you start playback in the reverse mode, the player
plays back only one side.
When you load a cassette into only one of the
two decks;
The player plays both sides of the tape repeatedly
until you press the stop button.
When you load cassettes Into both decks;
The player plays both sides (forward and reverse)
of the tape in deck 1, and then both sides of the tape
in deck 2. Playback will continue until you press the
stop button.
Press DOLBY NR if the cassette you want to
play was recorded with Dolby noise re
duction.
•The Dolby NR indicator lights.
• If the tape was not recorded in a Dolby NR mode, press
DOLBY NR again. The Dolby NR indicator will go out.
Reverse mode indicator
T
о
П г n /
1 1 1 г и и L
1
п
LEEEKJU
J и _
с:;
rCE
э
Tape counter
Dolby NR indicator
5
Press one of the play buttons to start play
back.
(Also available from the remote control)
>: The forward side (front side) will play.
<3; The reverse side will play.
The display Indicates which tape is playing.
Т о С
J С
п п 1
1-4 DECK1 )
1 1 1 1
1 _
и и 1 1
>
ct:i
f DOLBY NR 1
•When you load cassettes in both decks, press DECK 1/2 to select
the deck you want to use.
•You can reverse the direction of play manually during playback by
pressing the opposite playback button.