Panasonic SC-CH350 - Manual (Page 27)

■ From the remote control
1 Press the CD input select button.
2 Press PROGRAM.
The program indicator will appear on the display.
3 Press the numeric buttons to select the track
numbers.
To select a track between 1 and 10:
Press the appropriate numeric button 1-10/0 directly.
To select a two-digit track over 10:
First press +10 and then a numeric button 1-10/0.
For example:
O
_ , CD+10
Track no. 13:
Track no. 20: CQ.t'IO CD+10
Track no. 35: ^
CD+10
a-
10/0
o
CD+10 5
Notes:
•ERROR appears on the track display when you program a
nonexistent track.
•FULL appears on the track display when you have tried to
program more than 36 tracks to indicate that you cannot
program more than 36 tracks.
•—:— appears on the time display when the total play time of
the programmed tracks exceeds 99 minutes. In this case, the
display will not show the total time.
4 Repeat step 3 until you have completed the
program.
5 Press the CD play button.
The program play will begin from the first track you pro­
grammed.
27