Panasonic SC-CH350 - Manual (Page 38)

Edit-Recording from Compact Discs
You can edit-record up to 36 tracks.
Using the edit-recording safeguards against a break in the continu­
ity of the sound when the recording changes from one side of the
tape to the other.
Sequential CD recording (ALBUM)
The system calculates and displays in advance the length of the
tape required to accommodate the recording of all the tracks on the
compact disc in their original sequence. The tracks are then re­
corded in their original sequence.
9
CANCEL o
lD-4»8
w / A I 0 I £ \
f
□
I------------ .^„1.
O O “
Switch on the power.
1 Press the CD input select button.
2 Press OPEN/CLOSE on the CD player to load
a disc.
3 Press CD EDIT.
4 0Turn the jog dial to select ALBUM.
The ALBUM, PROGRAM, and FIT displays will appear in
sequence.
( 2 ) Press SET.
The length of the tape required to record all the tracks
appears on the display.
Album edit-recording display
n
I r
r
i_
53
l I l i S S I E l B i D H S d ) B i l I H
In this case, you would need a C-59 or longer tape.
If the compact disc has 37 or more tracks, ERROR appears
first and then the system will automatically establish the pro­
gram edit-recording mode. (See page 42.) Program up to
36 tracks in the program edit-recording mode, and proceed
with the recording.
5 Load a cassette in deck 2.
Since, in this case, you need a tape that is at least 59 minutes
long, insert a C-60 tape.
Check that the tape’s erasure prevention tabs are intact. Then
insert the cassette into deck 2.
6 Press DOLBY NR when making a Dolby NR
recording.
7 Press REVERSE MODE to select the “ "
reverse mode for automatic two-sided record­
ing.
8 0 Turn the jog dial to specify the length of the
tape you are using.