Panasonic KX-FP121NZ - Manual (Page 78)

Gopying
Making a copy
The unit can make single or multiple copies (up to 99). Any transmittable document (p. 50) can be copied.
1
2
3
4
5
6
7
8
Open the document feeder tray.
Adjust the width of the document guides to the size
of the document.
Insert the document (up to 15 pages) FACE DOWN
until a single beep is heard and the unit grabs the
document.
Display; STANDARD
• Make sure the handset is on the cradle.
If necessary, press (RESOLUTION] repeatedly
to select the desired setting (p. 46).
Press iSTART/SET/COPY],
NUMBER=1 [100%]
Enter the number of copies (up to 99).
If necessary, choose an enlargement/reduction rate
by rotating (EASY DIAL). See next page.
If you want to print collated copies, press
( COLLATE) until the following is displayed
(see below).________________________________
COLLATE=ON
Press fSTART/SET/COPY].
• The unit will start printing.
OR
Press [ QUICK SCAN ] if you want to remove the
copy document for other uses.
• The unit will feed the document and scan it into
memory, then start printing.
Note:
• If a resolution is not selected, FINE resolution
will be selected automatically.
• You can make or receive a voice call while
making copies.
• After copying, the enlargement/reduction rate
setting will return to “100%”.
To stop copying
Press [ stop ].
Printing coilated copies
The unit will print uncollated copies. You can also print collated copies. See the example below.
Example: Making two copies of a 4 page original document:
I_4
J
(Uncollated) (Collated)
Note:
• If you turn the collating feature on, the unit
will store the document into memory and
print it. If memory becomes full while storing,
the unit will only print out the stored_pages.
• After copying, the collating feature will turn
off automatically.
78