Panasonic KX-FP121NZ - Manual (Page 55)

Sending Faxes
Multiple stations
This feature is useful for sending the same document to selected parties whose telephone numbers are stored
in the One-Touch Dial or EASY DIAL directory. You must program the desired parties into one of the
BROADCAST keys {One-Touch Dial keys 1,2 or 3).
Important:
• Before programming, make sure that the desired telephone numbers have been stored into the One-Touch
Dial or EASY DIAL directory.
• The BROADCAST keys can be used as One-Touch Dial keys 1,2 or 3 or as broadcast keys.
These functions cannot be used at the same time.
Programming the BROADCAST keys with telephone numbers
1
2
3
4
5
Press [DIRECTORY PROGRAM].
Display: PRESS STATION
Press fSTART/SET/COPY) after entering
all of the desired stations.
USE EASY DIAL
Press one of the [BROADCAST] keys.
DIAL MODE ▼A
Press. or to select “BROADCAST’.
Example: BROADCAST 1 ▼A
Press fSTART/SET/COPY).
DIR= [ 0 0 0 ]
Enter the station.
a: Using the One-Touch Dial:
For stations 1-3 which are not used as
[ broadcast ] keys, press the preset
One-Touch Dial key.
For stations 4-6, press (LOWER), then press
the preset One-Touch Dial key.
Example: DIR=Margy [001]
Using the EASY DIAL directory:
Rotate [EASY DIAL] until the desired name is
displayed.
Example: Glen [001]
Press [START/SET/COPY].
Example: DIR=Glen [002]
To enter other stations, repeat this step (up to
20 stations).
REGISTERED
PRESS STATION
USE EASY DIAL
• To program another BROADCAST key,
repeat steps 2 to 6.
Press [DIRECTORY PROGRAM) to exit
the program.
[LOWER]
®/®
[BROADCiASf)/
One-Touch Dial keys
■ 0,‘=:O,
(DCr)C15''“'! s " ■ ^''^,,-^0
O ClIID
(STOP)
(START/SET/COPY)
O
EASY DIAL
[DIRECTORY PROGR^
Note:
• If you make a mistake while programming,
press [ stop ], then make the correction.
• Confirm the stored numbers by printing a
broadcast list (p. 114).
■n
o
•D
55