Setting the date and time, To correct a mistake – Panasonic KX-FP121NZ User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Date and time, your logo and facsimile
telephone number---------------------- -------
■■>.V :V-\:^:'
You should program the date and time, your logo and facsimile telephone number. This information will
be printed on each page transmitted from your unit.
® L.
"o Э
Q) s.
гШ {Ц
^ SI
о
3 .
Setting the date and time
1
2
Press [MENU].
Display:
Press @, then (5) [T].
1.SYSTEM SET UP
SET DATE & TIME
Press i$TART/SET/COPY].
M:01/D;01/Y:99
— Curso^
Enter the correct month/day/year by selecting
2 digits for each using the dial keypad.
Example: Aug. 10, 1999
Press ¡0][8) ¡US] ISIB-
M:08/D:10/Y:99
Press (START/SET/COPY).
TIME:
12:00AM
Enter the correct hour/minute by selecting
2 digits for each using the dial keypad.
Press [S to select “AM” or “PM”.
Example: 3:15PM
1. Press [p][3] [T]®.
TIME:
03:15AM
2.
Press (3 until “PM” is displayed.
TIME:
03:15PM
Press (START/SET/CO^.
SETUP ITEM [
8
Press [MENU].
Note:
• You can enter the number by rotating
(EASY DIAL] in steps 4 and 6. In this case,
press (g to move the cursor.
• The accuracy of the clock is approximately
±60 seconds a month.
• This unit is year 2000 compliant.
To correct a mistake
• Press Я) O'" (B to move the cursor to the
incorrect number, then make the correction.
• If you press [STOP] while programming, the
display will return to the previous one.
25