Panasonic KX-FP121NZ - Manual (Page 104)

Receive mode
Operations
Probiem Cause & Remedy
I cannot select the desired receive
mode.
• If you want to set the TAD/FAX, FAX ONLY or TEL/FAX mode:
- Select the desired mode using feature #77 (p. 63), and
- Press f AUTO ANSWER) to turn on the AUTO ANSWER light.
AUTOANSWEfI
TACVFAX ON
CZD
D-—ON
• if you want to set the TEL mode:
- Press (AUTO ANSWER) to turn off the AUTO ANSWER light.
AUTOANSWER
TAO/FAXON
•OFF
Copying
Problem" ШО£Т1 Cause ^ Remedy'
The unit does not make a copy. You cannot make a copy during programming. Make the copy
after programming or stop the programming.
A dirty pattern or a black line
appears on the copied document. • The glass or rollers are dirty. Clean them (p. 113).
• The center rib is dirty. Clean it (p. 113).
The copied image is distorted. The thermal head is dirty. Clean it (p. 113).
The document is not copied properly. The film is not inserted correctly. Insert it correctly (p. 111, 112).
The copied document is blank. The film is not inserted correctly. Insert it correctly (p. Ill, 112).
The printing quality is poor. Some paper has instructions recommending which side to print
on. Try turning the paper over.
The printing is faint.
Original Copy
You may have used paper with a cotton and/or fiber content that
is over 20%, such as letterhead or resume paper.
ABC ABC
A paper jam occurs during copying. • The film is not inserted correctly. Insert it correctly (p. Ill, 112).
Answering device
Problem ‘ Cause & R e m e d y ,
No voice messages have been
recorded in the TAD/FAX mode. • The memory is full. Erase some or all of the messages (p. 86, 92).
I cannot retrieve recorded messages
from a remote teiephone.
• Make sure that you use the remote operation ID correctly (p. 90).
104