Panasonic KX-FP121NZ - Manual (Page 70)

Receiving Faxes
Extension teiephone
tf you connect an extension telephone to the same line, you can receive fax documents using the extension
telephone. You do not have to press fSTART/SET/COPY] on the unit.
Important:
• Use a touch tone telephone as the extension telephone and enter the fax activation code firmly.
1
2
When the extension telephone rings, lift the
handset of the extension telephone.
When:
— document reception is required,
— a fax calling tone (slow beep) is heard, or
— no sound is heard,
press @ (
9
] (pre-selected fax activation code)
firmly.
Hang up the handset.
• The unit will start reception.
Note:
• You can change the fax activation code (see
below).
Fax activation code
The fax activation code is required to receive faxes using an extension telephone (see above).
Important:
• This code should be different from the remote operation ID (p. 90).
1
2
3
4
5
7
8
Press (MENU).
Display:
Press @, then [
4
] (Tj.
1.SYSTEM SET UP
FAX ACTIVATION
Press (START/SET/COPY1.
MODE=ON TA
Press ( t ] or ® to select “ON”.
• If this feature is not required, select “OFF”.
Press [START/SET/CO^.
CODE= + 9
• The display will show the pre-selected code.
Enter the new code.
• This code can be from 2 to 4 digits in length
using 0-9, and *.
Press [START/SET/COPYl.
SETUP ITEM [ ]
Press (MENU).
Note:
• If you subscribe to any special telephone
company services which require a code, all
or part of the fax activation code must be
different from the service access code.
• The fax activation code should not be set to
“ 0000 ”.
70