Panasonic KX-FP121NZ - Manual (Page 33)

Qne^Jouch f Dial
Storing names and telephone numbers in the One-Touch Dial =
The unit’s-memory allows you to use the One-Touch Dial for rapid access to your most frequently dialed
numbers. 6 stations are available.
• One-Touch Dial keys 1, 2 or 3 can be used as One-Touch Dial keys (DIAL MODE) or as broadcast keys
(BROADCAST). These functions cannot be used at the same time. For the broadcast function, see
pages 55 to 57.
1
4
5
Press (DIRECTORY PROGRAM].
Display: PRESS STATION
USE EASY DIAL
For stations 1-3
Press one of the One-Touch Dial keys.
DIAL MODE TA
Press [START/SET/COPY) to go to the next prompt
For stations 4-6
Press (LOWER), then press one of the One-Touch
Dial keys.
Enter the station name, up to 10 characters, by
following the instructions on page 27.
Example: NAME=John
Press (START/SET/COPY).
Example; I -
Enter the telephone number up to 30 digits.
Example: =1114497
• If you want to enter a hyphen, press (HYPHEN)
(One-Touch Dial key 1).
Press (START/SET/COPY).
To program other stations, repeat steps 2 to 6.
Press [DIRECTORY PROGRAM) to exit the program.
Note;
• If “DIAL MODE” is not displayed when you select
stations 1, 2 or 3 in step 2, the broadcast function has
been set. To use the station as a One-Touch Dial key,
press (▼) to select “DIAL MODE”. The broadcast
function will be canceled.
• A hyphen entered in a telephone number counts as two
digits.
' cao
CD®® ^
®® ®
C|i®®,..;
®®® o
(HYPHEN) (SECRET)
One-Touch
Dial keys
; ^ I
(START/SET/COPY
(DIRECTORY PROGRAM]
Helpful hint:
• You can confirm the stored items on the
display (p. 38) or on the telephone number
list (p. 114).
To keep the telephone number
secret
Press (SECRET] (One-Touch Dial key 3) after
entering the telephone number in step 5.
• A secret number cannot be viewed after this
is set.
• The telephone number will not appear on the
telephone number list.
• Pressing (SECRET) does not count as a
digit.
To edit a stored station name
and number
Enter the desired name in step 3.
Enter the desired number in step 5.
To erase a stored station name and number,
see page 37.
o
■o
3"
o
3
33