Sending faxes, Connecting tone, Sending faxes connecting tone – Panasonic KX-FP121NZ User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Faxes
Connecting tone
This feature allows you to hear connecting tones, such as a fax tone, ring back tone or busy tone for several
seconds when you send a fax using the One-Touch Dial or EASY DIAL directory. This will tell you the status of
the other party’s machine.
— Fax tone:
The other party’s machine is ready for reception,
— Ring back tone: If this tone continues, the other party’s machine may not be a facsimile or may have run
out of paper. Check with the other party.
— Busy tone:
The other party’s machine is busy. Let the unit continue redialing or press [STOP] and try
again later.
This feature is set to “ON” as a pre-selected setting. If this feature is not required, you may turn it off.
Press (MENU).
Display:
Press then [
t
]®.
1
2
3
4
5
6
1.SYSTEM SET UP
CONNECTING TONE
Press fSTART/SET/COPY).
MODE=ON
▼A
Press ® or
(X)
to select the desired setting.
• If this feature is not required, select “OFF”.
Press fSTART/SET/COPY).
SETUP ITEM [
]
Press [
m
MJ] .
09
o
■O
-<
.
Note:
• The connecting tone volume cannot be adjusted.
59