If a power failure occurs, Copying, Answering device – Panasonic KX-FT37NZ User Manual
Page 80
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operations
Copying
Problem
Cause & Remedy
The unit does not make a copy.
« You cannot make a copy during programming. Try to make a copy
after programming or stop the programming.
A dirty pattern or a black line
appears on the copied documents.
® The glass or rollers are dirty. Clean them (p. 84).
The copied Image Is distorted.
® The thermal head is dirty. Clean it (p. 85).
The copied document is blank.
® The recording paper roll is installed incorrectly. Make sure that the
shiny side of the paper is facing down and re-install the paper
(P-19).
Answering device
Problem
Cause & Remedy
No voice messages have been
recorded in theTAD/FAX mode.
® The memory is full. Erase some or all the messages (p. 62, 68).
I cannot retrieve recorded messages
from a remote telephone.
® Make sure that you use the remote operation ID correctly (p. 66).
If a power failure occurs
• The urfit will not function,
e The memory contents will not be erased.
® When you set delayed transmission and the programmed start time has passed during a power faiiure, the
transmission will be attempted after power is restored.
80