Panasonic KX-FT37NZ - Manual (Page 33)

Sending faxes manually
1
2
3
Open the document feeder tray.
Adjust the width of the document guides to the size
of the document.
Insert the document FACE DOWN (up to 10 sheets)
until a beep tone is heard.
Display; STANDARD
Press [ RESOLUTiOM) repeatedly to select the
desired setting, if necessary (see the bottom of this
page).
5
6
7
Press [DIGITAL SP-PHÓNEl or lift the handset.
TEL=
Dial the fax number.
Example; TEL=5678901
When a fax tone is heard, press
(START/COPY/SET), and hang up the handset if
using it.
CONNECTING
Note:
© If the other party answers your call, ask them to start
receiving a fax, then press your (START/COPY/SET].
To feed 11 or more sheets at a time
Insert the first 10 sheets of the document. Add the extra
sheets (up to 10) before the last sheet is fed into the unit.
Sending Faxes
Document
feeder tray Document guide(s)
Dial keypad
(DIGITAL SP-PHONE] (START/COPY/SET]
To redial the last number
Press (REDIAL/PAUSE].
• If the line is busy, the unit will automatically
redial the number up to 2 times.
• While waiting for redial, the following will be
displayed.
WAITING REDIAL
To stop transmission
Press [STOP].
To eject the document, press (STOP) again.
s>
o
•o
*<.
Selecting the resolution
Select the desired resolution according to the type of document.
For printed or typewritten originals with normal-sized characters.
For originals with small printing.
For originals with minute printing.
For originals containing photographs, shaded drawings, etc.
® Using the fine, super fine or half tone setting will increase the transmission time.
♦ if the resolution setting is changed during feeding, it wilt be effective from the next sheet.
® The super fine resolution only works with other compatible machines.
33