Skipping the greeting message, Voice guide example, Changing to – Panasonic KX-FT37NZ User Manual
Page 69: Tel mode, Remote operation, Turning the message transfer/pager call on or off
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Operation
Changing to
the
TEL mode
You can change the setting of the receive mode from TAD/FAX to TEL from a remote location.
1
.
Call your unit.
2. Enter your remote operation ID.
3. Press [s] 5] ■
Turning the message transfer/pager call on or off
You must pre-program a transfer telephone number or a pager number (see page 72) before using this feature.
Press ®
(T)
to turn ON the message transfer/pager
call.
Press S] [
2
] to turn OFF the message transfer/pager
call.
—If a transfer telephone number or a pager number is
not programmed, you cannot turn this feature ON.
The voice guide will prompt you.
Skipping the greeting message
Press ® during the greeting message playback.
—The unit will skip the rest of the greeting message.
Voice guide example:
Message transfer is set
Transfer phone number is 123456789.
or
Pager calf is set
Pager number is 098765432.
Message transfer is off.
or
Pager call Is off.
Transfer phone number is not set
or
Pager number is not set
>
I
■
2
5’
to
o
o
<
o
(D
69