Panasonic KX-FT37NZ - Manual (Page 76)

Error Messages
Error messages on printed reports
When a problem has occurred, one of the following messages will be printed on the transmission and journal
reports (see pages 37 and 38).
Communication message Error code Cause & Remedy
COMMUNICATION ERROR
41-72
FF
® A transmission or reception error occurred. Try again or check
with the other party.
DOCUMENT JAMMED
— 9 The document is jammed. Remove the jammed document (p. 82).
ERROR-NOT YOUR UNIT 53, 54
59, 70 ® A transmission or reception error occurred because of a problem
with the other party’s machine. Check with the other party.
MEMORY FULL — 9 The document was not received due to memory being full.
NO DOCUMENT — 9 The document was not fed into the unit properly. Reinsert the
document and try again.
OTHER FAX NOT RESPOND 9 The other party’s machine was busy or ran out of recording
paper. Try again.
9 The document was not fed properly. Reinsert the document and
try again.
9 The other party’s machine rings too many times. To send a fax
manually, diai the number, confirm the fax tone, and press
(START/COPY/SETl.
9 The other party’s machine is not a facsimile. Check with the other
party.
PAPER JAMMED — 9 The recording paper Is jammed. Clear the jammed paper (p. 81).
PAPER OUT 9 The unit ran out of recording paper. Install a recording paper roll
(p. 19).
PRESSED THE STOP KEY
—
9 The (STOP ] button was pressed and fax communication was
canceled.
PRINTER OVERHEATED
—
9 The printer overheated. Let the unit cool down.
THE COVER WAS OPENED —
® The cover was opened. Cióse it and try again.
OK — 9 Fax communication was successful.
76