Panasonic KX-FT37NZ - Manual (Page 77)

Error Messages
rror messages on the LCD display
If the unit detects a problenn, one or more of the following messages will appear on the display.
Display message Cause & Remedy
CALL SERVICE
• There is something wrong with the unit. Contact your service personnel.
CHECK COVER
© The cover is open. Close it.
CHECK DOCUMENT
« The document is not fed into the unit properly. Reinsert the document and try
again. If misfeeding occurs frequently, clean the document feeder rollers (p. 84).
If the problem remains, adjust the feeder pressure (p. 83).
® Attempted to transmit a document longer than 600 mm (23Va'‘). Press the
[ STOP 1 button to remove the document. Divide the document into two or more
sheets and try again.
CHECK MEMORY ® Memory (telephone numbers, parameters, etc.) has been erased. Re-program.
DIRECTORY FULL
• There is no space to store new stations in the EASY DIAL directory. Edit or
erase unnecessary stations (p. 30).
FAX IN MEMORY
® The unit has (a) document(s) in memory. See the other message instructions to
print out the document(s).
MEMORY FULL
® There is no room left in memory to record a message. Erase some or ail of the
messages (p. 62, 68).
• The memory is full of received documents, install a new recording paper roll
(p. 19), or clear the jammed paper (p. 81).
NO RESPONSE
© The other party’s fax machine is busy or ran out of recording paper. Try again.
OUT OF PAPER • The unit ran out of recording paper. Instaii a recording paper roll (p. 19).
PAPER JAMMED The recording paper is jammed. Clear the jammed paper (p. 81),
POLLING ERROR
« The other party’s machine does not have a polling feature. Check with the other
party.
REDIAL TIME OUT
The other party’s machine is busy or ran out of recording paper. Try again.
X
o
■D
REMOVE DOCUMENT
The document is jammed. Remove the jammed document (p. 82).
TRANSMIT ERROR
• A transmission error occurred. Try again.
UNIT OVERHEATED
The unit is too hot. Let the unit cool down.
77