Fax only mode, All calls are received as faxes), Fax only mode (all calls are received as faxes) – Panasonic KX-FT37NZ User Manual

Page 48: Activating the fax only mode _ receiving faxes, Changing the tad/fax mode to the fax only mode

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FAX ONLY mode

(all calls are received as faxes)

Activating the FAX ONLY mode _

Receiving Faxes

Turn on the AUTO RECEIVE mode by pressing

[AUTO RECEIVE] until the AUTO RECEIVE light

turns on.

o The display will show the following.

Display:

fax

only

mode

® If the AUTO RECEIVE setting is set to the TAD/FAX

mode, reset it to the FAX ONLY mode (see below).

» The unit will automatically answer ail calls and only

receive fax documents.

® The number of rings before a call is answered can be

changed (see the next page).

Changing the TAD/FAX mode to the FAX ONLY mode

Change the AUTO RECEIVE setting from the TAD/FAX mode to the FAX ONLY mode.

Dial keypad

Press (MENU].

Display;

O Press @, then E [s].

1.SYSTEM SET UP

AUTO RECEIVE

MODE=TAD/FAX VA

0 Press [START/COPY/SET].

^ Press [T] or S] to select “FAX ONLY".

g Press (START/COPY/SET).

Press [MENU].

MODE^FAX ONLY

V A

SETUP ITEM [

]

I©

©’©I

fSTART/COPY/SETl

Note:

in step 4.